Do not charge the battery with solar panels from any other brands. Charge the rechargeable battery with a standard and high-quality DC 5V/9V battery charger or Reolink solar panel.The battery is built-in, so do not remove it from the camera.
#Handy note argus how to#
Learn useful tips on how to extend the battery life in this post It’s designed to record motion events and to live view remotely only when you need it. Reolink Argus 3/Argus 3 Pro is not designed for running 24/7 at full capacity or around-the-clock live streaming. If you plan to use the camera indoors and put it on a flat surface, you may place the camera into the stand bracket and adjust the camera angle by slightly rotating the camera back and forth. It is the most recommended installation method if you plan to mount the camera to the tree. Thread the loop strap through the slots and fasten the strap. NOTE: To adjust the camera angle later, please loosen the bracket by turning the upper part anticlockwise. Secure the camera by turning the part on the bracket identified in the chart clockwise. NOTE: Use the drywall anchors included in the package if needed.Īdjust the camera angle to get the best field of view. Next, attach the other part of the bracket to the base. Rotate to separate the base from the bracket.ĭrill holes in accordance with the mounting template and screw the base of the bracket to the wall. NOTE: If a moving object approaches the PIR sensor vertically, the camera may fail to detect motion.
#Handy note argus install#
For effective motion detection, please install the camera angularly.Install the camera 2-3 meters (7-10ft) above the ground to maximize the detection range of the PIR motion sensor.It’s recommended to fully charge the battery before mounting the camera outdoors.Ĭharge the battery with the Reolink Solar Panel (Not included if you only purchase the camera).įor better weatherproof performance, always keep the USB charging port covered with the rubber plug after charging the battery.
Step 2 Launch the Reolink Client, click the ” ” button, input the UID code of the camera to add it, and follow the onscreen instructions to finish the initial setup. Step 1 Download and install the Reolink Client: Go to > Support > App & Client. Scan the QR code on the device and follow the onscreen instructions to finish the initial setup. Step 3 Launch the Reolink App and click the ” ” button in the top right corner to add the camera. Step 2 Turn on the power switch to power on the camera.
0 kommentar(er)
